SprintRay
3D PrinterNanoPrint
SprintRay NanoPrint: 35-micron dental 3D printing in a compact footprint
The SprintRay NanoPrint is a compact chairside dental 3D printer for practices that want to print in-office. It combines 35-micron XY resolution with a 105 × 75 × 75 mm build area, and a footprint of 25 × 37 cm with the lid closed. Layer thickness is 50, 100 or 170 µm, depending on the material.
NanoPrint connects to SprintRay Cloud over Wi-Fi or Ethernet. You can build print jobs with Print Setup, or print designs ordered through SprintRay’s Cloud Design service, and send them straight to the printer. A heated build platform, slide-in 150 mL resin tanks with RFID tracking and a barcode scanner for resin keep the setup simple, while the 7-inch touchscreen tracks the health of the tank and the optical panel.
From design to print, without leaving the office
Order a design or build your own in SprintRay Cloud, send it to NanoPrint over Wi-Fi or Ethernet, and print on a printer that fits on a countertop.
What You Can Print with the SprintRay NanoPrint
Print-ready designs from SprintRay Cloud, printed in your office.
Occlusal guards and bleaching trays
Print occlusal guards and bleaching trays from designs you build yourself or order through SprintRay Cloud Design.
Surgical guides
Print surgical guides in-office for guided implant placement, from your own design or a Cloud Design order.
Dentures
Print removable and hybrid dentures from print-ready designs delivered through SprintRay Cloud.
Crowns, veneers and smile designs
Order crown, veneer and smile design files through SprintRay Cloud Design and print them on NanoPrint. Confirm the resin’s indication for each case.
Technical specifications
Frequently Asked Questions SprintRay NanoPrint
Power: 100–240 V, 50–60 Hz, 300 W, connected through a surge protector or uninterruptible power supply. Operating temperature: 21–29 °C (70–85 °F). Footprint: 25 × 37 cm, 41 cm high with the lid closed; allow 51 cm of height and 48 cm of depth to open the lid. Network: Wi-Fi router or Ethernet switch, with an active internet connection and a SprintRay account to send print jobs.
It has a 35 µm minimum XY feature size and prints in 50, 100 or 170 µm layers, depending on the material.
It is designed to run online: sending print jobs and ordering designs need a SprintRay account and an active connection over Wi-Fi or Ethernet. If the connection drops, you can download a print job to a USB drive and print through the front USB-C port.
The footprint is 25 × 37 cm, and it is 41 cm high with the lid closed. Leave room for the lid to open to 51 cm high and 48 cm deep. It runs on 100–240 V and 300 W.
Stir the resin and check the tank before each print, clean the build platform after each job, and cover the tank at the end of the day. The resin tank and the optical panel are consumables; the touchscreen tracks their health and tells you when to replace them.
They solve different jobs. Midas is built for restorations and prints from sealed resin capsules. NanoPrint is a compact tank-based printer for printing your own or Cloud Design files across a range of appliances. We can help you compare them for your case mix.
Talk to our team of experts
Tell us about your scenario. We’ll prepare a technical estimate and guide you to the best solution.
Fill in the fields below:
